AP.RO-PAP
AP.RO-PAP is a compact all-in-one reverse osmosis system producing up to 500 LPH of high-quality water. It includes prefiltration, reverse osmosis system, post filtration, mineralization, and a built-in 80L permeate storage tank with UV sterilization.
It is a particularly popular solution for whole-house water purification as it requires little installation and maintenance effort.
It is a particularly popular solution for whole-house water purification as it requires little installation and maintenance effort.
Benefits of AP.RO-PAP series
Space saving design
Reduced operational cost
Silent operation
High-quality equipment
for longer operation
Plug & Play:
includes everything to operate
Permeate flush
membrane cleaning
Features of AP.RO-PAP Series
Basic Equipment
Stainless steel probe
Stainless steel UV system
Composite carbon Pre-filters
Double low-pressure shutoff
Fully equipped electric board with pump protection
Low-pressure RO membranes
Low-pressure Shutoff
MP controller for quality monitoring
Multi-stage Stainless steel Grundfos pump
Stainless steel frame and equipment panel
Stainless steel needle regulation valve
Stainless steel panel mounted with Glycerin-filled gauges
Stainless steel pressure vessels
Optional Equipment
Nalco antiscalant
Additional storage tank
Technical specification of AP.RO-PAP 500 LPH
| MODEL | AP.RO PAP 500 LPH |
|---|---|
Permeate Flow (Clean water), LPH | 500 |
Membrane Quantity x Size | 2x4040 |
Automatic Flushing | Permeate Flush |
Max inlet water TDS, ppm | 4000 |
Max salt reduction, %* | 98 |
Water recovery rate, %** | 50 |
Max Input flow of water, m3 *** | 1 |
Power supply | 220 V, 50 Hz |
Dimensions, mm | 800x800x1300 |
Net weight, kg | 107 |
Sizing (inlet, outlet, concentrate) | 1⁄2” / 1⁄2” / 1⁄2” NPTF |
* Maximum salt rejection according to membrane manufacturer.
** Depends on feed water quality.
*** Recommended feed water pressure of 2.5 bar.