AP.RO-M Black Edition
The AP.RO-M Black Edition systems are compact commercial reverse osmosis units that allow a consistent production of high-quality water with low energy consumption and reduced operational cost. As a minor version of the AP.RO-M series, the AP.RO-M Black Edition series inherits a robust compact design, simple maintenance, and quiet operation.
Features of AP.RO-M BE Series
Basic Equipment
Composite carbon Pre-filters
Double low-pressure shutoff
Fully equipped electric board with pump protection
Low-pressure RO membranes
Low-pressure Shutoff
MP controller for quality monitoring
Multi-stage Stainless steel Grundfos pump
Stainless steel frame and equipment panel
Stainless steel needle regulation valve
Stainless steel panel mounted with Glycerin-filled gauges
Stainless steel pressure vessels
Various product sizes 150 – 1000 LPH
Optional Equipment
Grundfos DDE antiscalant dosing pumps
Supply pumps and storage vessels
Nalco antiscalant
Technical specification AP.RO-M Black Edition 150–1000 LPH
| MODEL | AP.RO M BE 150 | AP.RO M BE 250 | AP.RO M BE 300 | AP.RO M BE 500 | AP.RO M BE 750 | AP.RO M BE 1000 |
|---|---|---|---|---|---|---|
| Permeate Flow (Clean water), LPH | 150 | 250 | 300 | 500 | 750 | 1000 |
| Membrane Quantity x Size | 1x4021 | 1x4040 | 2x4021 | 2x4040 | 3x4040 | 4x4040 |
| Automatic Flushing | Optional | Optional | Optional | Optional | Yes | Yes |
| Max inlet water TDS, ppm | 4000**** | 4000**** | 4000**** | 4000**** | 4000**** | 4000**** |
| Max salt reduction, %* | 98 | 98 | 98 | 98 | 98 | 98 |
| Water recovery rate, %** | 50-95 | 50-95 | 50-95 | 50-95 | 50-95 | 50-95 |
| Max Input flow of water, m3 *** | 0.3 | 0.5 | 0.6 | 1 | 1.5 | 2 |
| Power supply | 220V, 50 Hz | 220V, 50 Hz | 220V, 50 Hz | 220V, 50 Hz | 220V, 50 Hz | 220V, 50 Hz |
| Dimensions, mm | 700 x 450 x 900 | 700 x 450 x 1270 | 700 x 450 x 900 | 720 x 595 x 1270 | 720 x 595 x 1270 | 720 x 595 x 1270 |
| Net weight, kg | 40 | 50 | 51 | 60 | 91 | 98 |
| Sizing (inlet, outlet, concentrate) | 1⁄2” / 1⁄2 ” / 1⁄2” NPTF | 1⁄2” / 1⁄2 ” / 1⁄2” NPTF | 1⁄2” / 1⁄2 ” / 1⁄2” NPTF | 1⁄2” / 1⁄2 ” / 1⁄2” NPTF | 1⁄2” / 1⁄2” / 1⁄2” NPTF | 1⁄2” / 1⁄2 ” / 1⁄2” NPTF |
* Maximum salt rejection according to membrane manufacturer.
** Depends on feed water quality.
*** Recommended feed water pressure of 2.5 bar.
**** Not recommended for inlet water with chlorides concentration above 500ppm.
